If you need to make a cut to your tile at the bottom of your wall, there are two possible ways you can do this within the program.
Option one
- From the Wall (2D) view, insert only one horizontal strip of the tile that you wish to lay and cut. Make sure that you have selected Apply the pattern horizontally
. - Double click on the inserted tile and change the strip height value in the properties window:
- Click on the Update button
to see the changes made. - Using the Apply pattern horizontally command, continue tiling the rest of your strips.
Option two
- From the Wall (2D) view, insert only one horizontal strip of the tile that you wish to lay and cut. Make sure that you have selected Apply the pattern horizontally
.
- Right click on the inserted tile and select Strip Height -> Manual.
- Select your new height from a visual reference point or insert a new value manually.
- Using the Apply pattern horizontally command, continue tiling the rest of your strips.
This article is valid for the 2017 version and later.